RIDGID R2501 1/4 Sheet 5-Pack Sandpaper Blowout! 17 Grits! Free Ship!

Description

We messed up and now you can save big on
5-Packs of
sandpaper for your
RIDGID R2501
Sander!
Once in awhile production errors occur and we just had one.
The holes on these sanding sheets
just don't line up as well as we would like
!  The sanding surface itself is fine and most of the through pad dust evacuation holes are only partially covered.
What this means is that you can now get
5-Sheet Packs of
premium sandpaper for your sander that will sand extremely well at a fraction of the normal cost.
Stock up today because quantities are limited!
Sanding Sheets are
1/4 Sheet
(4.5x5") in size, pre-punched and w
ork on the
RIDGID R2501
*
1/4 sheet sander
Our Sanding Sheets Offer Unmatched Sanding Performance and Grit Selection
'Stay Put' No-Slip design provides enhanced gripping for reduced sandpaper slippage on Hook-and-Loop compatible sanders.  This is a true
Clamp It And Forget It
solution
'Place and Clamp' mounting method means no more fussing around trying to get the sandpaper even under each retention clamp.  Simply place the sanding sheet on the bottom of the sander, aligning the dust collection holes with the pad holes, and clamp.
Sanding Sheets are made with Aluminum Oxide for longer lasting sanding performance
Wide variety of grits insures you have the right sanding sheets for every project
*
RIDGID R2501
Sander shown on any digital images is for reference purposes only and is not included with the sale of the sandpaper bundle
Note:  Sandpaper Bundles arrive in bulk packaging only
Shipping
Domestic Shipments
: Domestic Shipping is Free!
International Shipments
: International
First Class, International Priority Mail and eBay's Global Shipping will be offered once one clicks on the Checkout button.  At that point one is able to select the preferred/most cost effective shipping method
Grit
Coarseness
Guide
Coarse - 40 Grit - Good for fast removal of material
Medium - 60 to 80 Grit - Good for sanding bare surfaces in preparation for finishing and for removal of previous finishes
Fine - 100 to 120 Grit - Good for additional preparation of surfaces before applying finishes
Very Fine - 150 to 220 Grit - Good for final preparation of surfaces before applying finishes
Very Fine Finish Sanding - 240 to 320 Grit - Good for sanding finishes between coats
Extra Fine - 400 to 600 Grit - Good for initial polishing of finishes
Super Fine - 800 to 1200 Grit - Good for final polishing of finishes
Ultra Fine - 1500 to 2000 Grit - Good for final polishing of thick finishes