Mastervolt Powercharger 12/40-3 Battery Charger part# 44210400

Description

Mastervolt Chargemaster 24/30-3 Battery Charger.
Brand new. Never used or installed. Unit was tested on shop bench and is working per specifications.
part#
44210400
12VDC - 40A charger
Mounting bracket and temperature sensor included
Specifications
General specifications
Nominal output voltage
12 V
Total charge current
40 A
Number of battery outlets
3
Charge current second output
40 A
Charge current third output
40 A
Battery bank size
100-450 Ah
Nominal input voltage
120/230 V (50/60 Hz)
AC connection
connector strips
Power supply mode
yes
Display/read-out
LED display
Fastening
with supplied mounting bracket or 4x screw for wall mounting or 4x screw for floor installation
Dimensions, hxwxd
291 x 210 x 131 mm
11.5 x 8.3 x 5.2 inch
Weight
4 kg
8.8 lb
Compliance
CE, E-mark (95/54/EG), SAE JI l7l (ISO8846 ignition protected), ABYC A-31, UL (incl. marine supplement FCC class B)
Technical specifications
Charge characteristic
IUoUo, automatic / 3-step+ for gel/AGM/wet/Lithium Ion
Charge voltage Bulk
14.4 V
Charge voltage Absorption
14.25 V
Absorption time
4 hours
Charge voltage Float (wet batteries)
13.25 V
Charge voltage Float (Gel/AGM batteries)
13.8 V
Temperature compensation
-22 mV/ °C
-12 mV/ °F
DC voltage compensation
automatic
Power consumption (DC side)
< 5 mA
Full load consumption (230 V AC)
700 W
Current Control function
no
Power factor control
> 0.98
Temperature range (ambient temp.)
-25 °C to 70 °C
-13 °F to 158 °F
Cooling
vario fan
Protection degree
IP23
Protections
over temperature, over load, short circuit, high/low battery voltage
MasterBus compatible
no
Charger Status Interface (alarm contact)
yes, using a Multipurpose Contact Output (code 77030500)