JM PVC 1" - 6" White PVC Pipe Boot Flashing with Clamping Ring

Description

Use:
A smooth, cone-shaped boot for traditional or split-pipe flashing applications to securely seal the penetration. Pipe boots eliminate the need for field fabrication.
Material:
Flexible, non-reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy® KEE (ketone ethylene ester).
Color:
White
Features and Components Use: A smooth, cone-shaped boot for traditional or split-pipe flashing applications to securely seal the penetration. Pipe boots eliminate the need for field fabrication.
Material: Flexible, non-reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy®* KEE (ketone ethylene ester).
Color: White
System Compatibility This product may be used as a component in the following systems. Please reference product application for specific installation methods and information. Multi-Ply BUR APP SBS Single Ply TPO PVC EPDM HA CA CA HW HA CA HW SA MF MF AD MF AD MF AD BA Do not use in Multi-Ply systems Compatible with the selected Single Ply systems above Key: HA = Hot Applied CA = Cold Applied HW = Heat Weldable SA = Self Adhered MF = Mechanically Fastened AD = Adhered BA = Ballasted Peak Advantage® Guarantee Information Systems Approved for use in any JM Peak Advantage Guarantee System Installation/Application Hot Air Weld • Do not install JM PVC Pipe Boot in direct contact with asphalt or coal tar pitch • Each boot has a cutting guide for easy reference and diameter measurements. JM PVC Pipe Boots accommodate pipe sizes from 1" to 6" (2.5 cm to 15.2 cm) in diameter. Standard size pipe clamps covering the largest possible range (6" diameter)are included for each pipe boot. Dimensions less than 1.5" diameter may require alternative clamps. Standard pipe boots are heat welded to JM PVC Membrane.
• Refer to JM PVC applicator guides or detail drawings for instructions Packaging and Dimensions Size* 1" - 6" (2.5 cm - 15.2 cm) Boots per Box 10 (clamping rings included) Weight per Boot 1.2 lb (0.54 kg) Weight per Box 12 lb (5.44 kg)
Thickness 0.060" (1.52 mm) *Standard size pipe clamps covering the largest possible range (6" diameter) are included for each pipe boot. Dimensions less than 1.5" (3.8 cm) diameter may require alternative clamps. Storage Storage Conditions Store indoors, out of direct sunlight, and keep clean and dry prior to application. Temperature Range 60°F and 80°F (16°C and 27°C) Component Type FP Penetration A Accessory Single Ply